94-98 Ford 7.3L 5 sp *350 hp, 800 ft. lbs. of torque
Solid Flywheel Conversion Kits
Con O stands for performance Organic linings,
OFE stands for a combination of Organic & Feramic linings,
FE stands for all Feramic linings on the clutch disk.
The pressure plates have been modified for a higher plate load.
All clutch kits include everything needed to do the job including our Kevlar® pilot bushing.
Options Available:
1. Con O - Using 2 Performance Organic Facings (Smooth engagement)
2. Con OFE - Using 1 Performance Organic & 1 Feramic Facing (Moderate engagement)
3. Con FE - Using 2 Feramic Facings (Possible rough engagement)
KEVLAR® Pilot Bushing
The nylon KEVLAR® composite absorbs the vibration that the Ford diesels create. This bushing can also be used as a repair bushing to run with a scored input shaft thus saving dollars on the cost of a new input shaft.
With all our Ford clutch kits, a Kevlar pilot bushing will be included. This is a $40 value!
Important
This clutch design will offer a very soft pedal. When truck is modified and under load the clutch pedal may stick to the floor.
You can remove the helper spring on the clutch pedal. By doing this, it will not only firm the clutch pedal up some, but resolve any clutch pedal inversion problems.
We reccomend installing a new clutch fork on the 1999 & 2000 trucks when replacing the clutch assembly.
Call us with any questions, 7042902289.
|
Manufacturer:
South Bend Clutch |
| SKU: |
SBC1944-5OK/SBC1944-6OK
|
Sign In
