94-07 Dodge 5.9L
Dodge HTB2 - Street Stock 62
450-525 HP 1050 ft. lbs. torque
Fits 94-2007 Dodge Cummins Turbo Diesels.
A boost fooler in included for 03-07 trucks.
3rd Generation (2003+) trucks include a wastegate resistor.
These turbos will not work with a factory installed wastegate.
The HTB turbo series features strong, large shaft, extended tip compressor turbos for aftercooled Dodge Cummins engines. With a 4" exhaust system, free-flowing air box and fuel enough to burn, 450-525 HP is the comfort range for this turbo. The HTB line-up features extremely durable and responsive chargers. Even after the initial quick spool-up, our HTB turbos build boost even quicker than other hybrid turbos so that there is plenty of boost at low-end, for towing and, well, for sheer fun. The result is minimal smoke as well as even lower EGT's.
You have a choice of two different high-flow wastegated turbine housing set-ups. You can get great spool-up. You can get drive pressures down to 1:1 ratio at 45 lbs boost.
These turbos feature ported shroud compressor housings, well as dual ported wastegates with adjustable actuators set at about 40 lbs psi. Keep in mind that boost equates to turbine speed and once you exceed "safe" boost levels of a turbo, any turbo will become a candidate for failure. Engine head gaskets and other components are at risk as boost levels approach 50 lbs.
The turbos for 94-2002 trucks are pretty much "bolt-up" except for the exhaust downpipe. If you have been running an HX40W then our outlet flange will make connecting to your HX40 downpipe easy. The 03-06 need not require a downpipe though an 03-early 04 might want one since the stock exhaust elbow necks down a bit.For 3rd gen engines, we machine our turbo exhaust outlet to accept your stock exhaust adapter so no downpipe is required. Contact us for an install sheet 704-290-2289
|
Manufacturer:
High Tech Turbo |
| SKU: |
1262359,1262257
|